BS EN 736-1 1995
|
ID： |
24CFD654889E414190006DC730A6EFB2 |
|
文件大小(MB)： |
0.19 |
|
页数： |
12 |
|
文件格式： |
|
|
日期： |
2013-6-1 |
|
购买： |
文本摘录（文本识别可能有误，但文件阅览显示及打印正常，pdf文件可进行文字搜索定位）：
BRITISH STANDARD BS EN,736-1:1995,Valves —,Terminology —,Part 1: Definition of types of valves,The European Standard EN 736-1:1995 has the status of a,British Standard,Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Thu Apr 12 10:07:07 GMT+00:00 2007, Uncontrolled Copy, (c) BSI,BS EN 736-1:1995,This British Standard, having,been prepared under the,direction of the Engineering,Sector Board, was published,under the authority of the,Standards Board and comes,into effect on,15 July 1995,. BSI 07-1999,The following BSI references,relate to the work on this,standard:,Committee reference PSE/7,Draft for comment 92/76141 DC,ISBN 0 580 24276 5,Committees responsible for this,British Standard,The preparation of this British Standard was entrusted to Technical,Committee PSE/7, Valves, upon which the following bodies were represented:,Amalgamated Engineering Union,Association of Bronze and Brass Founders,British Chemical Engineering Contractors’ Association,British Foundry Association,British Gas plc,British Plumbing Fittings Manufacturers’ Association,British Valve and Actuator Manufacturers’ Association,British Water,Chartered Institution of Building Services Engineers,Electricity Association,Energy Industries Council,Engineering Equipment and Materials Users’ Association,GAMBICA (BEAMA Ltd.),Health and Safety Executive,Institution of Mechanical Engineers,LP Gas Association,Ministry of Defence,Pipe Line Industries Guild,Society of British Water Industries,Water Services Association of England and Wales,West Midlands CBI,Coopted members,Amendments issued since publication,Amd. No. Date Comments,Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Thu Apr 12 10:07:07 GMT+00:00 2007, Uncontrolled Copy, (c) BSI,BS EN 736-1:1995,. BSI 07-1999 i,Contents,Page,Committees responsible Inside front cover,National foreword ii,Foreword 2,Text of EN 736-1 3,Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Thu Apr 12 10:07:07 GMT+00:00 2007, Uncontrolled Copy, (c) BSI,BS EN 736-1:1995,ii . BSI 07-1999,National foreword,This British Standard has been prepared by Technical Committee PSE/7 and is,the English language version of EN 736-1:1995 Valves — Terminology —,Part 1: Definition of types of valves, published by the European Committee for,Standardization (CEN).,EN 736-1 was produced as a result of international discussions in which the,United Kingdom took an active part.,A British Standard does not purport to include all the necessary provisions of a,contract. Users of British Standards are responsible for their correct application.,Compliance with a British Standard does not of itself confer immunity,from legal obligations.,Summary of pages,This document comprises a front cover, an inside front cover, pages i and ii,the EN title page, pages 2 to 7 and a back cover.,This standard has been updated (see copyright date) and may have had,amendments incorporated. This will be indicated in the amendment table on the,inside front cover.,Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Thu Apr 12 10:07:07 GMT+00:00 2007, Uncontrolled Copy, (c) BSI,EUROPEAN STANDARD,NORME EUROPéENNE,EUROP腎SCHE NORM,EN 736-1,February 1995,ICS 01.040.23; 23.060.00,Descriptors: Valves and fittings, vocabulary, classifications, designations,English version,Valves — Terminology,Part 1: Definition of types of valves,Appareils de robinetterie — Terminologie —,Partie 1: Définition des types d’appareil,Armaturen — Terminologie —,Teil 1: Definition der Grundbauarten,This European Standard was approved by CEN on 1995-02-01. CEN members,are bound to comply with the CEN/CENELEC Internal Regulations which,stipulate the conditions for giving this European Standard the status of a,national standard without any alteration.,Up-to-date lists and bibliographical references concerning such national,standards may be obtained on application to the Central Secretariat or to any,CEN member.,This European Standard exists in three official versions (English, French,German). A version in any other language made by translation under the,responsibility of a CEN member into its own language and notified to the,Central Secretariat has the same status as the official versions.,CEN members are the national standards bodies of Austria, Belgium,Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and,United Kingdom.,CEN,European Committee for Standardization,Comité Européen de Normalisation,Europ鋓sches Komitee für Normung,Central Secretariat: rue de Stassart 36, B-1050 Brussels,. ……
……